COMPUTERIZED TENSILE TESTING MACHINE

Mã SP: B

The table type has large test space and long stroke. Multiple model of width can satisfy large specimen test requirement. The maximum test capacity is 20 kN with high precision, low noise and maintenance-free of servo drive system

Share:

Maintenance-free transmission mechanism to reduce machine maintenance problems and in the same time it provides a quiet test environment and high-precision test results Support precision jog wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy. High-speed signal feedback mechanism can reduce the chance of machine overload. The reserved external signal can be connected to an external signal source, increasing machine control mode.

Specs

 

 Description

 Max. Capacity

 

 20kN

 Units

 

 Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), 
 ton(long), tonf(short) 
 Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg 
 

 Force Resolution

 

 31 bits

 Force Precision

 

 1/100,000

 Test stroke(w/o grip)

 

 800mm

 Stroke resolution

 

 0.0001mm

 Space between columns

 

 425 mm (550mm, 680mm, 800mm optional)

 Speed range

 

 0.0002 ~ 830 mm/min adjustable(Set up by 
 computerized)

 Speed accuracy

 

 High speed mode 
 0.05 ~ 830 mm/min 
 Low speed mode 
 0.0002~3 mm/min 
 

 PC-Port

 

 RJ45(TCP/IP)(Connect software optional)

 Data sampling rate

 

 1200Hz (Max.)

 Hardware safety protection

 

 upper limit, lower limit, emergency stop button

 Motor type

 

 Servo Motor

 Stiffness Slop

 

 1585 kgf/mm

 Power Supply

 

 Single phase 200V -240 V, 5A

 Dimension of Machine

 

 95 x 58 x 151 cm

 Weight of Machine

 

 145kgf

 Force Resolution

 

 31 bits

 Force Precision

 

 1/100,000

 

Related Products

Benchtop Tensile Strength Tester
Benchtop Tensile Strength Tester

Servo Control System Benchtop Tensile Strength Tester

  Gotech series`tensile strength testers are widely applied to determining elongation,compression, flexing,tear,peeling,shear force,adhesive force,etc.of finished or semifinished products such as rubber,plastic, footwear, leathers, metal,wire, paqer, timber,etc.

Vui lòng liên hệ: 0938 539 455(A.Thọ)
Universal Testing Machine
Universal Testing Machine
Vui lòng liên hệ: 0938 539 455(A.Thọ)
ZEISS O INSPECT
ZEISS O INSPECT
Vui lòng liên hệ: 0938 539 455(A.Thọ)
ZEISS MICURA
ZEISS MICURA
Vui lòng liên hệ: 0938 539 455(A.Thọ)
ZEISS ACCURA
ZEISS ACCURA
Vui lòng liên hệ: 0938 539 455(A.Thọ)
MÁY ĐO LỰC KÉO ĐA NĂNG
MÁY ĐO LỰC KÉO ĐA NĂNG

The table type has good configuration with multiple function with samall space requirement. The max. test capacity can reach to 5 kN. This model is good choice for standard specimen and small finish products. It also provide a quite test environment and high precision test result. This model is using special testing software which is used Windows 7/8 of Person computer.

Vui lòng liên hệ: 0938 539 455(A.Thọ)