Martindale Abrasion & Pilling Tester TF210
Martindale Abrasion & Pilling Tester, or Martindale Tester, determines the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters. That is called Martindale Rub Test.
The Martindale Abrasion Tester is also used to conduct the abrasion performance of medical protective clothing to ensure durability when used in medical scenarios.
Martindale Test Meaning
Martindale Abrasion Test refers to the test of textile products based on the standard system of the Martindale method, and through this test tests the abrasion characteristics of the fabric, and abrasion resistance is an important index of textile product quality, which directly affects the durability of the product and the use of the effect, abrasion resistance refers to the fabric or with other materials in the process of repeated friction, resistance to wear characteristics. The machine used to test the abrasion resistance of the fabric is the Martindale AbrasionTester.
Application of Martindale Abrasion&Pilling Tester TF210
Martindale abrasion resistance tester is suitable for testing the abrasion resistance and pilling degree of knitted fabrics, woolen fabrics, artificial leather, synthetic leather, etc. under pressure, which is used in many industries such as textile, footwear, and garment.
Because of the unique design of our Martindale abrasion and pilling test machine, you can remove individual sample holders for inspection without lifting the top motion plate. It provides individual counters and parking functions, interval time settable, and a large touch-screen display.
The Martindale abrasion testing equipment is available with 4, 6, or 9 test positions. Standard sample holders and nine and 12kpa Weights are included.
Features of Martindale Abrasion & Pilling Tester TF210
1. More accurate testing
Dynamic operation of the grinding table and upper grinding head can be controlled within 0.05, and the flexibility of the rotating axis is strictly calibrated.
2. Higher testing efficiency
Equipped with two sets of grinding heads, Martindale Abrasion Tester TF210 can do pilling tests and abrasion resistance tests at the same time.
3. 3 speeds, 3 workstations
Three operating speeds and three test stations to choose from. Different test speeds can be set – slow (24rpm), normal (47.5rpm), and fast (75rpm). 9 test stations are available for the larger base and 4 or 6 for the smaller base. Martindale Abrasion Tester TF210 is very flexible.
4. Applicable for 17 international test standards
Martindale Abrasion & Pilling Tester TF210 Can be applied to ISO 12945-2-2020; ISO12947-1-1998, GB/T 21196.1-2007; GB/T 4802.2-2008; BS EN 530-2010; ASTM D4970/4970M-2016e3; ASTM D 4966-12; SATRATM31A/ B; PUMA; BS EN 16094-2012 and 17 other international standards.
5. Test results are consistent with international third-party laboratories
All the test data are comparable to the test results obtained by internationally renowned third-party laboratories.
6. More stable operation
Adopt servo motor control to improve the stability of machine operation and reduce machine noise. Choosing Martindale Abrasion Tester TF210 means choosing reliable rub testing results
Specifications of Martindale Abrasion&Pilling Tester TF210
The Drive system is PLC, programmable control with a large touch-screen
Abrasion test
- Max stroke of movement 60.5+/-0.5mm
- Weight of holder and spindle 198+/-2g
Pilling test
- Max stroke of movement 24+/-0.5mm
- Weight of holder and spindle 155+/-1g
Included Accessories (1 for each station)
Abrasion test (To ISO 12947-1)
- Mounting weight (2.5+/-0.5kg, for both abrasion and pilling test)
- Pilling instruments holders (Dia. 38 mm)
- Loading Weights (395+/-7g)
- Loading Weights (595+/-7g)
Pilling Test (To ISO 12945-2)
- Linear adaptor. To convert to straight-line motion.
- Sample Retaining Rings for pilling test
- Pilling test holders (Dia. 90mm)
- Loading Weights (260+/-1g)
1 Auxiliary device for specimen mounting.
1 Drawing pen
One set of abradant fabric, wool felt, and backing foam for each workstation.
Optional orders of Martindale Abrasion & PillingTester TF210
- EMPA990 Photographic Standards for Pilling Test (knitted + woven)
- Standard Wool Abrasive Fabric SM25. 1.6M wide x 5M length – For abrasion test and pilling test (when automatic)
- SM50 Photographs for Pilling Test IWS + ASTM
- SM26 woven wool felt, 24 pcs/box, Φ140mm
- SM26 woven wool felt, 24 pcs/box, Φ90mm
- SM28 polyurethane ether foam, 250 X 200mm/pcs, 25pcs/box
Weight
| Type | Net Weight | Packed Weight |
| TF210A | 65 kg | 110 kg |
| TF210B | 75 kg | 125 kg |
| TF210D | 90 kg | 147 kg |
Power
| 220/110 V | 50/60 Hz |
Dimensions
| Type | Station | Machine | Packed |
| TF210A | 4 heads | 650 x 510 x 280 mm (LxWxH) | 700 x 620 x 750 mm (LxWxH) |
| TF210B | 6 heads | 650 x 510 x 280 mm (LxWxH) | 700 x 620 x 750 mm (LxWxH) |
| TF210D | 9 heads | 830 x 590 x 280 mm (LxWxH) | 970 x 770 x 750 mm (LxWxH) |
Standards
| ISO 12945-2-2020 | ISO 12947-1-1998 | ISO 12947-2-1998 | ISO 12947-3-1998 |
| ISO 12947-4-1998 | GB/T 21196.1-2007 | GB/T 21196.2-2007 | GB/T 21196.3-2007 |
| GB/T 21196.4-2007 | GB/T 4802.2-2008 | BS EN 530-2010 | ASTM D4970/4970M-2016e3 |
| ASTM D 4966-12 | |||
| Optional Standard: | BS EN 388-2016+A1-2018 | SATRATM31 A/B | PUMA |
| BS EN 16094-2012 | ISO20344-2011 |
Related Products
