TEMPERATURE & HUMIDITY CHAMBER

Product Code: CV340

The AtmoExplorer Temperature Humidity Chamber also known as the Environmental Chamber, Temperature and Humidity Test Chamber, is used for testing the performance of various materials under different environmental conditions.

This Climate Chamber is suitable for testing the heat resistance, cold resistance, dry resistance, wet resistance, and other properties of materials. The AtmoExplorer Temperature and Humidity Chamber is applicable for quality testing of products, such as electronics, electrical appliances, mobile phones, communication devices, instruments, vehicles, plastic products, metals, food, chemicals, construction materials, medical equipment, and aerospace products.


Share:

Wide range of applications

The AtmoExplorer Temperature And Humidity Chamber can simulate high temperature, low temperature, high humidity, and low humidity, and is suitable for testing requirements in various fields and industries such as electronics, materials research, medicine, automobiles, food, etc. We also provide other climate chambers, such as the Thermal Shock Test Chamber, Hast Chamber, and Aging Test Chamber.

Excellent both on control precision and uniformity of temperature and humidity

Temperature and humidity control precision:±0.5℃; ± 3%RH

Temperature and humidity uniformity:± 2℃; ± 5.0%RH

Achieve heating and cooling quickly

When unloaded, this Climate Chamber can achieve heating from room temperature to 100℃ within 30 minutes, It can also achieve cooling from room temperature to -20℃ within 60 minutes.

Intuitive and practical screen, easy to operate

The Temperature And Humidity Test Chamber has a 7-inch large touch screen that displays information in Chinese and English. The set values (SV) and perform values (PV) of temperature and humidity are displayed directly, as well as the currently executing program number, segment information, remaining time, and number of cycles. It also has a separate program editing screen.

Stable operation originated from high-quality insulation materials and humidifiers

The heating element of this Constant Temp and Humidity Chamber is made of spring-type nickel-chromium wire, and the humidifier is a UL-shaped humidifier in the form of stainless steel electric steam generation.

 

High-quality refrigeration system and refrigeration auxiliary parts

Tecumseh fully hermetic high-efficiency compressor from France, solenoid valve from Japan, and pressure controller and oil separator of an internationally famous brand. We provide you with a high-quality constant temperature and humidity chamber.

A variety of safety protection

This Temp Humidity Chamber can run safely. The burn prevention switch, the high-pressure protection for the compressor, the overheating protection for the compressor, the over current protection for the compressor, the no-fuse switch protection, the water shortage alarm, and the long-term water shortage shutdown protection.

Various sizes can be customized

such as 80L, 150L, 225L, 408L, 800L, 1000L

The Specification of AtmoExplorer Temperature & Humidity Chamber

Temperature range              -20℃~+150℃

(-60 ℃/-40 ℃ ~+ 150℃ Optional)

Humidity range                    20%-98%RH

Temperature and humidity control accuracy    ±0.5℃;±3%RH

*Note: To achieve the performance above, it should be measured after 30 minutes of temperature stabilization.

 

Temperature and humidity distribution uniformity: ±2℃; ± 5%RH

*Note: To achieve the performance above, it should be measured at 1/6 position from each wall of the test area, and need to be measured after 30 minutes of temperature stabilization.

Heating time  from room temperature to 100℃, within 30 minutes (when no load)

Cooling time  from room temperature down to -20℃, within 60 minutes (when no load)

Testable area: 500*750*600 mm (D*W*H)

Controller specifications

Accuracy                     Temperature    ± 0.1℃ + 1digit, humidity ± 1%RH + 1digit.

Degree of Resolution    temperature ± 0.1 ℃, humidity ± 0.1%RH

Temperature slope       0.1~9.9 can be set.

Display the current program number, number of segments, remaining time, and number of laps.

The temperature and humidity program setting value is displayed in a circular curve, with an instant display of the program curve execution function.

Separate program editing screen, at least 4 temperature and time steps can be input on each page.

 

Model    Power  Weight  Dimension

 

Model

Measurable temperature range

Overall dimension D*H*W(mm)

Inner Box size D*H*W(mm)

Power(KW)

Voltage / Frequency

Number of phases

Gross weight (kg)

 

CV340-80L

 

 

-40℃~ 150℃

-20℃~ 150℃

1250*1510*700

400*500*400

5.0KW

4.5KW

 

AC220V/50H

1 phase/3 wire

307

 

CV340-150L

 

 

-40℃~ 150℃

-20℃~ 150℃

1350*1610*800

500*600*500

5.0KW

4.5KW

 

AC220V/50H

1 phase/3 wire

367

 

CV340-225L

 

 

-40℃~ 150℃

-20℃~ 150℃

1350*1720*970

500*750*600

7.0KW

6.0KW

 

AC380V/50H

3 phase/5 wire

422

 

CV340-408L

 

 

-40℃~ 150℃

-20℃~ 150℃

1450*1820*1080

600*850*800

8.0KW

7.0KW

 

AC380V/50H

3 phase/5 wire

518

 

CV340-1000L

 

 

-40℃~ 150℃

-20℃~ 150℃

1850*1970*1280

1000*1000*1000

14.0KW

12.0KW

 

AC380V/50H

3 phase/5 wire

783

Related Products